Wooden Ships International Yacht Brokers
2 Southford Road
GB-TQ6 9QS Dartmouth
Tel 0044 (0) 1803 833899
Fax 0044 (0) 1803 833899
Dernière modification:  26.2.2019 Prix (EUR):  Prix selon consultation
Prix à l'étranger:  16.500,00 Livre sterling Année de fabrication:  1965
Longueur:  8,53 m / 27,98 fuss Largeur:  2,53 m
Tirant d'eau minimal:  1,52 m Tirant d'eau maximal:  1,52 m
Poste d'amarrage:  Grande-Bretagne, FALMOUTH, CORNWALL, UNITED KINGD État:  bon
Matériel de la coque:  Bois Rémorque:  Sans remorque
Numéro interne:  3110308    
Moteur: 1 × 0,00 kW (0,00 CV) In-bord YANMAR 2GM20 Diesel
Équipement: This is a slightly larger version of Laurent Gile's famous Vertue. She had a major refit in 1997, including new keel bolts, garboards, some re-fastening and the deck re-sheathed. Yanmar 2GM20 diesel, new 1998. 4 berths. Sold by Wooden SHips to present owner, she has been cruised locally around the Cornish coast but a lack of time has forced them to sell. An attractive boat, very well built in the beginning which is a huge positive, easy to handle for one or two people but with space for more if required., SPECS: Builder: Mashfords Yard, Cremyll, Plymouth, Designer: Laurent Giles & Partners, Flag of Registry: United Kingdom, Keel: Full; DIMENSIONS: Beam: 8 ft 4 in, LWL: 24 ft 6 in, Length on Deck: 28 ft 9 in, Minimum Draft: 5 ft 0 in, Maximum Draft: 5 ft 0 in; ENGINES: Total Power: 20 HP, Engine 1:, Engine Brand: Yanmar, Year Built: 1998, Engine Model: 2GM20, Engine Type: Inboard, Engine/Fuel Type: Diesel, Propeller: 3 blade propeller, Drive Type: Direct Drive, Engine Power: 20 HP, , Cruising Speed: 5 knots, Maximum Speed: 6 knots, TANKS: Fresh Water Tanks: 3 (8), Fuel Tanks: 1 Stainless steel (5); ACCOMMODATIONS: Number of single berths: 2, Number of twin berths: 1, Number of heads: 1; ELECTRONICS: Log-speedometer, Repeater(s), Compass, Depthsounder; SAILS: Spinnaker, Storm jib, Furling genoa, Battened mainsail; RIGGING: Tiller; INSIDE EQUIPMENT: Marine head - Baby Blake which discharges directly overboard, Oven - 2 burner Origo meths stove, Battery charger - 2 x 12 volt batteries for engine starting and domestics, both new in 2017, Fresh water maker - manually pumped fresh water; ELECTRICAL EQUIPMENT: Shore power inlet - Installed shore power system; OUTSIDE EQUIPMENT/EXTRAS: Solar panel, Manual windlass LAURENT GILES BERMUDAN SLOOP: Full Specification Wooden Ships Comments on this Laurent Giles Bermudan sloop Designed by Laurent Giles and Partners and built by Mashfords of Cremyll, Plymouth 1965 to design No 419 drawn in 1930. Jack Laurent Giles is one of the best know names in UK yacht design and was responsible for some of the most famous yachts ever built and sailed in UK. The 25? Vertue is one of his greatest designs, possibly the most successful small yacht design ever. This yacht is a slightly larger sister to the Vertue and can justly claim many of the smaller sister?s virtues and she closely resembles the Hiscock?s slightly larger Wanderer 111. The yacht was built for Cmdr Angus of Plymouth and remained in his ownership until sold by Wooden Ships to the Rev Mike Palmer and his wife in 1997. The yacht had never been fitted out below deck and by 1997 the Commander?s health was suffering and the yacht had not been sailed for a few seasons. In the ownership of Mike and Nettie Palmer she had a major refit in 1997 when the ballast keel was dropped and rebedded with new bolts, the hood ends of the planks were refastened, the dead-woods were refastened, the few strap floors were regalvanised, the garboards were replaced and the original canvas deck covering replaced with epoxy/glass. A new aluminium mast and rig was fitted. She was sold to an Englishman who lived and worked in France.   Subsequently she was sold and returned to the UK. The design is for a conventional long keeled yacht with a short spoon bow and a slightly raked transom stern with very attractive tumble-home.   Length on deck                                 28?9? Lwl                                                                         24?6? Beam                                                                    8?4? Draft                                                                      5? Tonnage                                                              7TM   Construction Planked in Larch on sawn oak frames with 2 steamed Canadian Rock elm intermediates.  Fastened with copper rivets to the steamed timbers and bronze screws in the sawn frames. Oak back bone with external lead ballast keel fastened with hot dipped galvanise keel bolts, all replaced in 1997. Heavy grown oak floors with some galvanised straps.  All galvanised floors removed and re-coated then replaced with new bolts in 1997. T&G straight laid pine deck sheathed in epoxy glass cloth and painted with non slip deck paint. Coverboards and king plank in varnished Afromosia.  High varnished toe rail all round Self draining cockpit with a varnished bridge deck.  Varnished lifting thwarts either side with deep lockers under. Transom hung rudder recently rebuilt.     Rig Fractional bermudan sloop rig on a keel stepped 1997 Selden alloy spar with a varnished spruce slab reefing boom. Stainless steel standing rigging all replaced in 2005. Rotostay roller furling headsail, running backstays in Highfield levers and a standing backstay to a bumpkin. Mainsail, jib, storm jib, staysail and spinnaker Bronze cockpit sheet winches.     Machinery Yanmar 2GM20 twin cylinder 20hp diesel fitted new in 1998. Single lever controls to a starboard offset fixed 3 blade bronze propeller.  5/6 knots at 1.5 litres/hour. 25 litre stainless fuel tank 120 litres of water in 3 separate tanks. 2 x 12 volt batteries for engine starting and domestics, both new in 2017. Charging via the 55 amp alternator with a smart regulator, solar panel or through shore power.  Installed shore power system.  Wiring replaced in 2006/2007.     Accommodation 4 berths including 2 saloon settee berths and twin V-berths forward. Steps down over the engine box with galley to starboard and chart desk to port. Galley has a 2 burner Origo meths stove set in a well and a single stainless sink with manually pumped fresh water Lifting chart desk faces outboard with electronics and nav equipment under the deck head. Half height bulkheads divide off the main saloon.  Settee berth either side with lockers under the side decks Centreline passage way going forward with the heads compartment to starboard and hanging locker to port. Heads is a Baby Blake which discharges directly overboard.  Fold down hand basin drains into the heads bowl. Forward cabin with twin V-berths and a large amount of storage volume under.     Full specification and details available upon request       Disclaimer: These particulars have been prepared in good faith from information provided by the Vendors and are intended as a guide, Wooden Ships cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. The Purchaser should instruct his agent or surveyor to validate all details as necessary and satisfy himself with the condition of the vessel and its equipment.